New product
 Dry series
 System grain of series
 Smashing series
 Mix series
 Heat source series
 Other
  Add:Jiangsu Changzhou Jiaoxi Towm
  President:Yaoqi.Gu
  Tel:0519-88908918 88908968
  Phone:013706115950
  Fax:0519-88906768
  Ministrant Tel:0519-88900280
  P.C.:213116
  Http: www.kelong-dry.com
  Email: info@kelong-dry.com
 
   
Your current position>>> home >>> product senter >>>Dry series >>>DWT SERUES MESH-BELT DRIER
 
 

  This machine is flowing and continuous type drying equipment firstly made by our factory.The machine is used for drying the piece,tape and particle state materials with good vegetable,herbal medicine of traditional Chinese medicine and others,for which the water content rate is high and the high temperature is not allowed .The machine owns the advantages,that its drying speed is fast,the evaporation strengh is high and the product quality is good.The de-waterign filtering cake state paste mateial,after the particle making or bar making,can be dried also.

  The materials are uniformly put on the mesh-belt by the material charger.
  The mesh-belt uses generally 12-60 mesh stainless steel wire net and it is drawn and moved inside the drier by a transmission device.The drier is drawn and moved inside the drier by a transmission device.The driet is composed of several units.For each unit,the hot air is circulated separately.In the first unit,air out from circutation air blower (5) pass through beside into low unit,after air is up and heated by steam heater (4),be shared by seperater(3),the air is spraied through mesh-belt covered with a special moisture from the fop to the bottom or from the bottom to the top,and this will complete the heat and mass transfer peocess.The air pipe of the top is controlled through an adjustment valve.The top and low circulation units can be freely equipped according to the users'demand,The unit nomber can be selected according to the demand.

2
type
DWT-1.2-8
DWT-1.2-10
DWT-1.6-8
DWT-1.6-10
DWT-2-8
DWT-2-10
unit number
4
5
4
5
4
5
belt width m
1.2
1.2
1.6
1.6
2
2
drying section length m
8
10
8
10
8
10
thickness of the material to be covered mm
10~80
temperature ℃
60~150
steam pressure Mpa
0.2~0.8
steam consumption kg/h
120~300
150~375
150~375
170~470
180~500
225~600
drying time h
0.2~1.2
0.25~1.5
0.2~1.2
0.25~1.5
0.2~1.2
0.25~1.5
drying stengh kgH2O/h
60~160
80~220
75~220
95~250
100~260
120~300
total power of the blower kw
8.8
11
12
15
16
20
total power of the equipment kw
10.1
12.3
13.3
16.3
17.3
21.3